This meeting is for Boeing only personnel that allows Boeing personnel attending the CMSC to meet with each other and discuss topics of interest internal to Boeing.
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno. Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno. Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Large scale MetrologyCritical Component Positioning & AlignmentSession Focus: A practical overview of how laser trackers, total stations, and terrestrial laser scanners enable first-time-right installation of large industrial components. Participants will learn how to control, measure, align, correct, and verify critical equipment throughout fabrication and construction.Key Takeaways•Understand... See More →
Monday July 20, 2026 1:00pm - 2:30pm CDT Brasserie
Training development strategies Session Focus: Understanding how to devlop training sessions to support your internal upskilling or reskilling of employeesKey Take Aways•Understand Assessment criteria and Learning outcomes •Outline course activities •How to develop a visual course map •Understand the importance of a Teaching plan •Slide deck – Yes or No? •Training Material... See More →
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery. Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
Monday July 20, 2026 3:00pm - 4:30pm CDT Brasserie
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
MetrologyWorks is your premiere source for all things related to portable CMM’s, including portable arms, laser trackers, laser scanners, and more. This includes but is not limited to, replacement accessories for your FARO Arm, Hexagon/Romer Arm, Laser Tracker, or portable laser... Read More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno. Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Associate Director for Summit Operation, Vera C. Rubin Observatory
Dr. Sandrine J. Thomas is the Vera C. Rubin Observatory Rubin Associate Director for Summit Operation, leading the team responsible to acquire all the data needed for the Legacy Survey of Space and Time (LSST). This includes raw images, calibration data as well as the telemetry data... Read More →
CMS Certification Review at CMSCA two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge... See More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →
Tuesday July 21, 2026 9:00am - 12:00pm CDT Brasserie
Metrolgy and GD&T Expert - Lenardo PRODUCT QUALITY organization Finmeccanica S.p.A. at Grottaglie-Monteiasi Plant Strada Provinciale 83 Grottaglie-Monteiasi - Grottaglie(TA) - 74023 - Italy
Gianluca Giordano is the SME technician for Leonardo Aeronautics Division, an Italy-based company that works in the aeronautics, defense, and space sectors for the world's leading aircraft manufacturers... Read More →
Body Shop Digitalization Operational Lead, BMW Manufacturing LLC
Matt Cornelius is the Body Shop Digitalization Operational Lead at BMW Plant Spartanburg in South Carolina. He works on high-volume data acquisition systems and develops innovative, data-driven systems for monitoring, predicting, and controlling body manufacturing processes. He... Read More →
Body Shop Metrology & Dimensional Quality Section Manager, BMW Manufacturing LLC
Curtis Tingle is the Body Shop Metrology & Dimensional Quality Section Manager at BMW Plant Spartanburg in South Carolina. He leads a team of metrology engineers, dimensional engineers, and software developers to achieve body shop dimensional quality targets through process control... Read More →
Coordinate Measuring Machine (CMM)•Sessions focus: Programming with flow controls for variables in manufacturing. •Key Takeaways •CMM and Probing systems review. •Conditional Statements •Variables, Loops, and part pattern examples using conditional deployment. •CMM Setups and Alignment Verification using programming logic. •Full Inspection vs Key Feature Check inside of a single... See More →
Tuesday July 21, 2026 10:00am - 11:30am CDT Far East Room
Applications Engineer Sr., Lockheed Martin Aeronautics – Skunkworks
Sam Gosiewski earned a B.S. in Mechanical Engineering from the University of Central Florida in 2019. He has spent the past 6½ years at Lockheed Martin Skunk Works, where he works with optical and laser scanners to verify aircraft assembly and ensure geometric conformance... Read More →
Airbus Chair in Large Volume Metrology, University College London [UCL]
Stuart Robson is the Airbus Chair in Large Volume Metrology where his research is focussed on innovation, demonstration and validation of sensing systems for aerospace manufacture and structures test. A on-going theme is on developing and deploying networks of imaging sensors built... Read More →
James Clark is the Technology Development Manager at ARIS Technology, where he leads the development and deployment of advanced robotic 3D measurement systems for aerospace, defense, and industrial manufacturing. With over 25 years of experience in 3D design, reverse engineering... Read More →
Mingu Kang is the Founder and CEO of ARIS Technology, where he leads the development of advanced robotic 3D metrology systems for aerospace, automotive, and defense manufacturing. Under his leadership, ARIS has focused on automating large-scale inspection through the integration of... Read More →
CMS Certification Review at CMSCA two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge... See More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →
Tuesday July 21, 2026 1:00pm - 3:00pm CDT Brasserie
Session Tue 1: What's New in SA: Release Updates & Strategic Roadmap (1:00pm-2PM) Cody Anderson & Viral VaghelaGet an inside look at the latest enhancements in Spatial Analyzer. This session will highlight new features recently release and preview powerful capability planned for 2025-2026. Come see how SA is evolving to meet your needs and improve performance across every stage of your measurement... See More →
Hexagon is a global leader in digital reality solutions, combining sensor, software, and autonomous technologies. We are putting data to work to boost efficiency, productivity, quality, and safety across industrial, manufacturing, infrastructure, public sector, and mobility applications... Read More →
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2025 CMSC Champions. All... See More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Tuesday July 21, 2026 1:30pm - 2:30pm CDT Education Zone
HUBBS Metrology Solutions (also known as HUBBS Machine & Manufacturing) is pleased to continue innovating for and servicing the metrology industry. Since its founding in 1984, HUBBS has become the most trusted OEM around the world for quality metrology targeting, accessories, and... Read More →
Autocollimation: See a live demo by Hexagon metrologists on the proper way to measure a mirror by autocollimating a laser tracker on it. This will take place in the Measurement Zone.
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2025 CMSC Champions. All... See More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Tuesday July 21, 2026 4:30pm - 5:30pm CDT Education Zone
Geodetic Systems Inc. (GSI) is the leading global supplier of industrial photogrammetry solutions in the portable metrology marketplace. GSI develops and markets the V-STARS family of 3D coordinate measurement systems for users involved in the measurement and inspection of applications... Read More →
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno. Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Director of Industrial Metrology for North America, Metronor Industrial
Brock LaHart is Director of Industrial Metrology for North America at Metronor Industrial, where he helps manufacturers modernize large-scale measurement, assembly, and alignment processes through innovative metrology solutions. With more than 30 years of experience, Brock has worked... Read More →
Jonathan McLaughlin is Field Services Manager at East Coast Metrology, a division of In-Place Machining Company, specializing in large-scale dimensional measurement and laser tracker applications for shipbuilding, defense infrastructure, and industrial projects. He holds a degree... Read More →
CMS Certification Review at CMSCA two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge... See More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →
Wednesday July 22, 2026 9:00am - 12:00pm CDT Brasserie
Rohit Khanna has been involved in the metrology industry for over 30 years helping advance 3D measurement software, optical inspection hardware, automated quality systems and augmented reality processes. As Founder of 3D Infotech, he has led the development of Universal Metrology... Read More →
CMS Certification Review at CMSCA two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge... See More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →
Wednesday July 22, 2026 1:00pm - 3:00pm CDT Brasserie
Session Wed 2: Laser Tracker Network Analysis (1:00-2:00PM)Steve Seiler Take a deep dive into Spatial Analyzer's network analysis tools using real-world data. Whether you're new to network alignments or looking to sharpen your analysis skills, this is a practical, data-driven walkthrough focused on improving confidence in your measurements.Session Wed 2: Automation in Action: Integrating Metrology... See More →
Hexagon is a global leader in digital reality solutions, combining sensor, software, and autonomous technologies. We are putting data to work to boost efficiency, productivity, quality, and safety across industrial, manufacturing, infrastructure, public sector, and mobility applications... Read More →
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2025 CMSC Champions. All... See More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Wednesday July 22, 2026 1:30pm - 2:30pm CDT Education Zone
HUBBS Metrology Solutions (also known as HUBBS Machine & Manufacturing) is pleased to continue innovating for and servicing the metrology industry. Since its founding in 1984, HUBBS has become the most trusted OEM around the world for quality metrology targeting, accessories, and... Read More →
2 measurement method: See a live demo by Hexagon metrologists on the proper way to measure a mirror by measuring 2 points. This will take place in the Measurement Zone.
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Donald (Donnie) D. Brown Certified CMS Level 2 Metrologist | AUKOM Metrologist | First Class Toolmaker | CMS Certification Committee Member Data Point Metrology (2024–Present) Owner / Metrologist Providing metrology consulting and CMM programming services with a focus on enhancin... Read More →
Wednesday July 22, 2026 3:30pm - 4:30pm CDT Education Zone
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2025 CMSC Champions. All... See More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Wednesday July 22, 2026 4:30pm - 5:30pm CDT Education Zone
Donald (Donnie) D. Brown Certified CMS Level 2 Metrologist | AUKOM Metrologist | First Class Toolmaker | CMS Certification Committee Member Data Point Metrology (2024–Present) Owner / Metrologist Providing metrology consulting and CMM programming services with a focus on enhancin... Read More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
Wednesday July 22, 2026 4:30pm - 6:30pm CDT Brasserie
MetrologyWorks is your premiere source for all things related to portable CMM’s, including portable arms, laser trackers, laser scanners, and more. This includes but is not limited to, replacement accessories for your FARO Arm, Hexagon/Romer Arm, Laser Tracker, or portable laser... Read More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
Thursday July 23, 2026 8:00am - 12:00pm CDT Brasserie
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno. Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Johan Cruz is a LEAN manufacturing process expert with over 20 years of leadership experience in industrial metrology, primarily serving the aerospace and automotive industries. Currently serving as Global Vice President at 3D Infotech, he leads delivery and support fulfillment... Read More →
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Senior Survey & Alignment Engineer, Argonne National Laboratory
William Jansma is a Senior Survey & Alignment Engineer for the Advanced Photon Source (APS)at Argonne National Laboratory. He specializes in the alignment of particle accelerators and experimental facilities, as well as research and development for next-generation accelerator systems... Read More →
Visit the Gigatour Tesla, consists of an outdoor drive around the perimeter of the facility and an indoor walk-through consisting of 2 to 3 manufacturing lines.Tours operate rain or shine, so please plan accordingly.Departure Location: in the Back under the porte-cochere (backside of casino under Bistro Napa) No pickup in the Valet Area Dress Code: Require long sleeved shirts,... See More →
Director of Product Management, ZEISS Industrial Quality Solutions
David Wick is the Director of Product Management at ZEISS Industrial Quality Solutions, where he leads a team responsible for bringing new solutions to market that solve customer manufacturing challenges. He is also currently directing the New Energy vehicle initiative for ZEISS in... Read More →
Suneel Kumar is a seasoned expert in Inspection, Metrology, and Quality Assurance,currently specializing in Aero Engine development at the Gas Turbine ResearchEstablishment (GTRE) in Bengaluru. With over two decades of dedicated experience, hehas become a pivotal figure in the precision... Read More →
Quality Assurance Engineer, Gas Turbine Research Establishment
Dedicated Quality Assurance Engineer and Researcher with 30+ years of experience in Research and Development of Gas Turbine Aeroengines at GTRE Bengaluru. Expertise in “Metrology, Manufacturing Process Quality Control, NDT, Technical Documentation and Auditing”. Committed to... Read More →
Ben Thomason carved out two decades as a civilian powerhouse within the Department of Defense, pushing the boundaries of aviation and missile sustainment R&D. He didn’t just adopt 3D scanning—he weaponized it to transform advanced manufacturing. After the DoD chapter, he launched... Read More →
Niah is an aspiring technologist with a passion for space exploration and computer programming. Inspired by Star Trek, he hopes to build a future career contributing to the advancement of space technology and the betterment of mankind.
Ilan is an aspiring problem-solver with a passion for metrology and real-world engineering applications, combining analytical thinking with creativity inspired by strategy games and fantasy worlds.
Online measurement platformsOnline learning platforms including NPL eLearning and 3DMU incorporating byte size learning applications, training sessions organized by Learning pathways to support metrology knowledge and understanding. •3D Measurement U (3DMU.org) is the online video training platform of the Coordinate Metrology Society (CMS), dedicated to metrology education, with a focus on... See More →
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery. Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level. As a Principal Engineer at E... Read More →
Thursday July 23, 2026 1:00pm - 5:00pm CDT Brasserie
Session Thurs 1 : Unlock the Full Potential of Your ATS600 & ATS800 with SA (1:00-2:00PM) Scott, Steve, Sarah, Tristan, Nick Join us for a focused walkthrough of the ATS600 & ATS800 workflows in Spatial Analyzer, including tips for setup, measurement strategies, and advanced use cases. This session will wrap with an open Q&A, so bring your questions and challenges for live discussion.
Hexagon is a global leader in digital reality solutions, combining sensor, software, and autonomous technologies. We are putting data to work to boost efficiency, productivity, quality, and safety across industrial, manufacturing, infrastructure, public sector, and mobility applications... Read More →
Learn about the CMS Education Committee and their important role in our society. You hear from the committee chair about their recent activity and the impact on metrology
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery. Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
Thursday July 23, 2026 1:30pm - 2:00pm CDT Education Zone
Airbus Chair in Large Volume Metrology, University College London [UCL]
Stuart Robson is the Airbus Chair in Large Volume Metrology where his research is focussed on innovation, demonstration and validation of sensing systems for aerospace manufacture and structures test. A on-going theme is on developing and deploying networks of imaging sensors built... Read More →
Thursday July 23, 2026 2:00pm - 3:00pm CDT Education Zone
HUBBS Metrology Solutions (also known as HUBBS Machine & Manufacturing) is pleased to continue innovating for and servicing the metrology industry. Since its founding in 1984, HUBBS has become the most trusted OEM around the world for quality metrology targeting, accessories, and... Read More →
This panel discussion will focus on automation and it’s role in industry and how to apply it. The panel will not only discuss automation but will entertain questions from the audience.
Thursday July 23, 2026 3:00pm - 4:00pm CDT Education Zone
CMS Happy Hour and Feedback Session: This session will wrap up the 2025 CMSC with a cash bar and a conference feedback session. Let us know what you liked about the CMSC and what should change. We value your input!
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery. Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
Visit the Gigatour Tesla, consists of an outdoor drive around the perimeter of the facility and an indoor walk-through consisting of 2 to 3 manufacturing lines.Tours operate rain or shine, so please plan accordingly.Departure Location: in the Back under the porte-cochere (backside of casino under Bistro Napa) No pickup in the Valet Area Dress Code: Require long sleeved shirts,... See More →
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery. Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
