Loading…
Type: Training clear filter
Monday, July 20
 

10:00am CDT

Online Learning Platform 3-DMU Tutorial
LIMITED
Monday July 20, 2026 10:00am - 11:00am CDT
Far East Room
Limited Capacity seats available

2026 Exhibitors
avatar for 3DMU

3DMU

3DMU

3D Measurement U, or 3DMU, is the video training arm of the Coordinate metrology Society.  Created in conjunction with the team at Quality Digest and the CMS Education Committee.
Topics include: Measurement uncertainty, scanning techniques, laser trackers, software and peripheral... Read More →
Monday July 20, 2026 10:00am - 11:00am CDT
Far East Room
  Training

1:00pm CDT

Large Scale Metrology
LIMITED
Monday July 20, 2026 1:00pm - 2:30pm CDT
Far East Room
Limited Capacity seats available
Large scale Metrology
Critical Component Positioning & Alignment
Session Focus: A practical overview of how laser trackers, total stations, and terrestrial laser scanners enable first-time-right installation of large industrial components. Participants will learn how to control, measure, align, correct, and verify critical equipment throughout fabrication and construction.
Key Takeaways
•Understand metrology’s role in reducing rework and installation risk
•Build accurate control networks for large-scale measurement
•Predict alignment issues through virtual fit-up
•Diagnose and correct misfitting parts using digital workflows
•Verify precise placement during installation
•Use scanning for context, planning, and as-built validation
CMSC Committee
avatar for Matthew Ilardo

Matthew Ilardo

AV AND IT ,HOTEL LIAISON, Brookhaven National Laboratory
​​​​Matthew Ilardo is an Engineer with Brookhaven National Laboratory (BNL) and is responsible for alignment and surveying for the entire BNL facility including the advanced partial accelerators. He is involved with training, support and purchasing of metrology equipment and... Read More →
Monday July 20, 2026 1:00pm - 2:30pm CDT
Far East Room
  Training

3:00pm CDT

Training Development Strategies
LIMITED
Monday July 20, 2026 3:00pm - 4:30pm CDT
Far East Room
Limited Capacity seats available
Training development strategies 
Session Focus: Understanding how to devlop training sessions to support your internal upskilling or reskilling of employees
Key Take Aways
•Understand Assessment criteria and Learning outcomes
•Outline course activities
•How to develop a visual course map
•Understand the importance of a Teaching plan
•Slide deck – Yes or No?
•Training Material •Assessment workbook
•Instructions for practical activities
Speakers
avatar for Keith Bevan

Keith Bevan

Executive Committee Past Chair, NPL
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery.
Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
Monday July 20, 2026 3:00pm - 4:30pm CDT
Far East Room
  Training
 
Tuesday, July 21
 

9:00am CDT

ECM Certification Training - Design Document Interpretation
LIMITED
Tuesday July 21, 2026 9:00am - 12:00pm CDT
Brasserie
Limited Capacity seats available
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents
· Measurement Device knowledge
· Measurement Planning
· Measurement Operations
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning

CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
2026 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →

Tuesday July 21, 2026 9:00am - 12:00pm CDT
Brasserie
  Training

10:00am CDT

GD&T Training Session
FILLING
Tuesday July 21, 2026 10:00am - 11:30am CDT
Far East Room
Limited Capacity filling up

Tuesday July 21, 2026 10:00am - 11:30am CDT
Far East Room
  Training

1:00pm CDT

Probe Calibration Verifications and Proper Methods
Tuesday July 21, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412

Tuesday July 21, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412
  Training

1:00pm CDT

CMM Creating your Program
LIMITED
Tuesday July 21, 2026 1:00pm - 2:30pm CDT
Far East Room
Limited Capacity seats available
Coordinate Measuring Machine (CMM)

•Sessions focus: Programming with flow controls for variables in manufacturing.

•Key Takeaways
•CMM and Probing systems review.
•Conditional Statements
•Variables, Loops, and part pattern examples using conditional deployment.
•CMM Setups and Alignment Verification using programming logic.
•Full Inspection vs Key Feature Check inside of a single program.
•CMM programming best practices.
•Reporting and CMM operator support using Control Pairs.
•And more optimal measurement solutions for real manufacturing scenarios.
Tuesday July 21, 2026 1:00pm - 2:30pm CDT
Far East Room
  Training

1:00pm CDT

ECM Certification Training - Measurement Device Knowledge
LIMITED
Tuesday July 21, 2026 1:00pm - 3:00pm CDT
Brasserie
Limited Capacity seats available
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents
· Measurement Device knowledge
· Measurement Planning
· Measurement Operations
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
2026 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →

Tuesday July 21, 2026 1:00pm - 3:00pm CDT
Brasserie
  Training

1:00pm CDT

Hexagon SpatialAnalyzer Training
LIMITED
Tuesday July 21, 2026 1:00pm - 5:00pm CDT
Continental Room
Limited Capacity seats available
Session Tue 1: What's New in SA: Release Updates & Strategic Roadmap (1:00pm-2PM)      
Viral Vaghela & Nick
Get an inside look at the latest enhancements in Spatial Analyzer. This session will highlight new features recently released and preview powerful capabilities planned for 2026. Come see how SA is evolving to meet your needs and improve performance across every stage of your measurement process. 

Session Tue 2: Machine Alignment: Optimizing Roller Measurements  (2:30PM-3:30PM)        
Rob Nack  
This session will focus on how to measure rollers using various methods for machine alignment and will cover set up, analysis and reporting. Key concepts include how to set up machine frames, how to align features to the machine frame, and optimizing measuring methods to maximize alignment efficiency.  
2026 Exhibitors
avatar for Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence
Join Hexagon at CMSC 2026 to experience the latest advancements in portable metrology and digital manufacturing workflows.
Visit Booth #204 to see live demonstrations of HYPERSCAN high-speed scanning, portable measurement solutions, reverse engineering workflows, and advanced insp... Read More →

Tuesday July 21, 2026 1:00pm - 5:00pm CDT
Continental Room
  Training

2:00pm CDT

Best Practice Tactile Points & Scanning
Tuesday July 21, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412

Tuesday July 21, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412
  Training

3:00pm CDT

CMM General Questions
Tuesday July 21, 2026 3:00pm - 3:30pm CDT
CMM BOOTH 412

Tuesday July 21, 2026 3:00pm - 3:30pm CDT
CMM BOOTH 412
  Training

3:00pm CDT

CMM 3 & 5 Axis Programing
LIMITED
Tuesday July 21, 2026 3:00pm - 4:30pm CDT
Far East Room
Limited Capacity seats available

Tuesday July 21, 2026 3:00pm - 4:30pm CDT
Far East Room
  Training

3:30pm CDT

CMM Subcommittee Meeting with CMM Users (Refreshments)
Tuesday July 21, 2026 3:30pm - 4:30pm CDT
Brasserie

Tuesday July 21, 2026 3:30pm - 4:30pm CDT
Brasserie
  Training
 
Wednesday, July 22
 

8:00am CDT

CMM Creating your Program
LIMITED
Wednesday July 22, 2026 8:00am - 9:30am CDT
Far East Room
Limited Capacity seats available

Wednesday July 22, 2026 8:00am - 9:30am CDT
Far East Room
  Training

9:00am CDT

ECM Certification Training - Measurement Planning and Execution
LIMITED
Wednesday July 22, 2026 9:00am - 12:00pm CDT
Brasserie
Limited Capacity seats available
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents
· Measurement Device knowledge
· Measurement Planning
· Measurement Operations
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
2026 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →

Wednesday July 22, 2026 9:00am - 12:00pm CDT
Brasserie
  Training

10:00am CDT

Trimble Large Volume Scanning Overview
LIMITED
Wednesday July 22, 2026 10:00am - 12:00pm CDT
Far East Room
Limited Capacity seats available


CMSC Committee
avatar for Coordinate Metrology Society

Coordinate Metrology Society

Coordinate Metrology Society

Wednesday July 22, 2026 10:00am - 12:00pm CDT
Far East Room
  Training

1:00pm CDT

Profiles and Position Tolerances
Wednesday July 22, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412

Wednesday July 22, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412
  Training

1:00pm CDT

ECM Certification Training - Analysis and Ethics
LIMITED
Wednesday July 22, 2026 1:00pm - 3:00pm CDT
Brasserie
Limited Capacity seats available
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents
· Measurement Device knowledge
· Measurement Planning
· Measurement Operations
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning

CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
2026 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
The Measurement & Alignment Services Division of In-Place Machining Company (IPM) brings together the expertise of East Coast Metrology (ECM), Exact Metrology, and OASIS Alignment Services (OASIS) to deliver advanced dimensional metrology, precision alignment, and instrument calibration... Read More →

Wednesday July 22, 2026 1:00pm - 3:00pm CDT
Brasserie
  Training

1:00pm CDT

Hexagon SpatialAnalyzer Training
LIMITED
Wednesday July 22, 2026 1:00pm - 5:00pm CDT
Continental Room
Limited Capacity seats available
Advanced topics

Session Wed 1: OTG & Level In SA (1:00-2:00PM)    
Steve Seiler
Understanding level to gravity is critical for accurate large-scale metrology and several alignment scenarios.  This session explores gravity compensation, levelling concepts, and straightening tools.  Typical workflows for gravity constrained networks will be discussed as well what to do if a metrology network is large enough that gravity cannot be considered uniform. 

Session Wed 2: Automation in Action: Integrating Metrology Solutions (2:30-3:30)    
Sarah Avino & Scott Sandwith
This session will walk through live demos of how Spatial Anayzer leverages its wide range of device connections including robots, laser trackers, total stations, PCMMs, and photogrammetry systems to automate the metrology processes. We'll show how built-in tools like Measurement Plans, along with SA's SDK, Python, C# and more can be used together to streamline inspection and assembly.
2026 Exhibitors
avatar for Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence
Join Hexagon at CMSC 2026 to experience the latest advancements in portable metrology and digital manufacturing workflows.
Visit Booth #204 to see live demonstrations of HYPERSCAN high-speed scanning, portable measurement solutions, reverse engineering workflows, and advanced insp... Read More →

Wednesday July 22, 2026 1:00pm - 5:00pm CDT
Continental Room
  Training

1:30pm CDT

GD&T Training
LIMITED
Wednesday July 22, 2026 1:30pm - 3:00pm CDT
Far East Room
Limited Capacity seats available

Wednesday July 22, 2026 1:30pm - 3:00pm CDT
Far East Room
  Training

2:00pm CDT

Introduction to CMM Certification - Review of Level 1 and 2 (Gary Confalone & Donnie Brown)
Wednesday July 22, 2026 2:00pm - 2:30pm CDT
Education Zone

Wednesday July 22, 2026 2:00pm - 2:30pm CDT
Education Zone
  Training

3:00pm CDT

CMM Best Practices
Wednesday July 22, 2026 3:00pm - 4:00pm CDT
Education Zone

Speakers
DE

Dr. Ed Morse

UNC Charlotte
Wednesday July 22, 2026 3:00pm - 4:00pm CDT
Education Zone
  Training

3:30pm CDT

CMM 3 & 5 Axis Training
LIMITED
Wednesday July 22, 2026 3:30pm - 5:00pm CDT
Far East Room
Limited Capacity seats available

Wednesday July 22, 2026 3:30pm - 5:00pm CDT
Far East Room
  Training
 
Thursday, July 23
 

8:00am CDT

CMS Certification Exam
LIMITED
Thursday July 23, 2026 8:00am - 12:00pm CDT
Brasserie
Limited Capacity seats available
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
Thursday July 23, 2026 8:00am - 12:00pm CDT
Brasserie
  Training

1:00pm CDT

Improving CMM Strategy
Thursday July 23, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412

Speakers
LC

Luke Confalone

Essex Bay Engineering

Thursday July 23, 2026 1:00pm - 2:00pm CDT
CMM BOOTH 412
  Training

1:00pm CDT

CMS Certification Exam
LIMITED
Thursday July 23, 2026 1:00pm - 5:00pm CDT
Brasserie
Limited Capacity seats available
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.
As a Principal Engineer at E... Read More →
Thursday July 23, 2026 1:00pm - 5:00pm CDT
Brasserie
  Training

1:00pm CDT

Hexagon SpatialAnalyzer Training
LIMITED
Thursday July 23, 2026 1:00pm - 5:00pm CDT
Limited Capacity seats available
Session Thurs 1 : Spatial Analyzer Contactless Scanning Workflows and Ask the Experts (1:00-2:00PM)
Scott, Steve, Sarah, Nick
Join the Spatial Analyzer team for a practical overview of the latest updates, capabilities, and workflow improvements, including new developments for the ATS800. The session will then transition into an open “Ask the Experts” discussion. Bring your questions, application challenges, measurement workflows, and real-world use cases for a collaborative conversation with the team.
2026 Exhibitors
avatar for Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence

Hexagon Manufacturing Intelligence
Join Hexagon at CMSC 2026 to experience the latest advancements in portable metrology and digital manufacturing workflows.
Visit Booth #204 to see live demonstrations of HYPERSCAN high-speed scanning, portable measurement solutions, reverse engineering workflows, and advanced insp... Read More →

Thursday July 23, 2026 1:00pm - 5:00pm CDT
  Training

2:00pm CDT

Program Validation Technics & Practices / Q & A
Thursday July 23, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412

Thursday July 23, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412
  Training

2:00pm CDT

Program Validation, Alignments, Exporting, Recall, Best Fit, Iterations
Thursday July 23, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412

Speakers
avatar for Donnie Brown

Donnie Brown

Owner/Senior Metrologist, Data Point Metrology
Donald (Donnie) D. BrownCertified CMS Level 2 Metrologist | AUKOM Metrologist | First Class Toolmaker | CMS Certification Committee Member Data Point Metrology (2024–Present)Owner / MetrologistProviding metrology consulting and CMM programming services with a focus on enhancing... Read More →
RD

Rich Dittman

GE Aerospace

Thursday July 23, 2026 2:00pm - 3:00pm CDT
CMM BOOTH 412
  Training

3:00pm CDT

MBD & Reporting Tips
Thursday July 23, 2026 3:00pm - 4:00pm CDT
CMM BOOTH 412

Thursday July 23, 2026 3:00pm - 4:00pm CDT
CMM BOOTH 412
  Training
 
Friday, July 24
 

10:00am CDT

Training Development Strategies
LIMITED
Friday July 24, 2026 10:00am - 11:30am CDT
Far East Room
Limited Capacity seats available

Speakers
avatar for Keith Bevan

Keith Bevan

Executive Committee Past Chair, NPL
Keith Bevan is the National Physical Laboratory's (NPL) Head of Manufacturing Training, responsible for the delivery network activities of NPL's training framework, training materials and quality of delivery.
Keith has been involved in measurement for 40 years having joined Rolls-Royce Ltd (aero engines) in 1975 as an apprentice working across a range of metrology activities including engine testing, manufacturing, co-ordinate metrology and calibration. During the mid-1980s Keith was employed... Read More →
Friday July 24, 2026 10:00am - 11:30am CDT
Far East Room
  Training

1:00pm CDT

Fundamentals of Structured Light Scanning
LIMITED
Friday July 24, 2026 1:00pm - 2:30pm CDT
Far East Room
Limited Capacity seats available

Speakers
avatar for Ben Thomason

Ben Thomason

Founder / Principal, Rocket City Metrology
Ben Thomason carved out two decades as a civilian powerhouse within the Department of Defense, pushing the boundaries of aviation and missile sustainment R&D. He didn’t just adopt 3D scanning—he weaponized it to transform advanced manufacturing. After the DoD chapter, he launched... Read More →
Friday July 24, 2026 1:00pm - 2:30pm CDT
Far East Room
  Training
 

Get help with the event

Contact event planner Event login
View support guides Find upcoming events
Create an event you'd love to attend!
Explore why organizers choose Sched • Success stories
Event App • Event scheduling • Event registration • Event ticketing • Sched forms • Call for papers • Badges • Conferences
© 2026. SCHED LLC - All rights reserved - Helping events since 2008
Event Planning Software • Privacy • Terms
Share Modal

Share this link via

Or copy link

Filter sessions
Apply filters to sessions.
Monday, July 20
Tuesday, July 21
Wednesday, July 22
Thursday, July 23
Friday, July 24
Brasserie
CMM BOOTH 412
Continental Room
Education Zone
Executive Room
Far East Room
Gold Room
Hubbs Metrology Booth 205 in the Exhibit Hall
International Ballroom
International Foyer
Measurement Zone
Nikon Booth 406 in Exhibit Hall
Regency Ballroom
Regency Ballroom Foyer
Reverchon Park
Royal Room
Venetian Room
  • Break
  • Exhibit Hall
  • General Sessions
  • Invitation Only
  • Meals
  • Meals / Breaks / Receptions
  • Measurement / Education Zone
  • Presentation
  • Training
  • Popular